آمار
| تعداد نشریات | 26 |
| تعداد شمارهها | 447 |
| تعداد مقالات | 4,557 |
| تعداد مشاهده مقاله | 5,380,005 |
| تعداد دریافت فایل اصل مقاله | 3,580,083 |
Design, Manufacturing, and Evaluation a Greenhouse Misting System for Edible Mushroom Production | ||
| Biomechanism and Bioenergy Research | ||
| دوره 3، شماره 2 - شماره پیاپی 6، اسفند 2024، صفحه 1-13 اصل مقاله (624.9 K) | ||
| نوع مقاله: Original Research | ||
| شناسه دیجیتال (DOI): 10.22103/bbr.2024.23372.1083 | ||
| نویسندگان | ||
| Mohsen Azadbakht* 1؛ Reza Naseri2؛ Mohammad Javad Mahmoodi1؛ Mohammad Vahedi Torshizi3 | ||
| 1Department of Biosystem Engineering, Gorgan University of Agricultural Sciences and Natural Resources, Gorgan, Iran. | ||
| 2Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran. | ||
| 3Department of Biosystem Engineering, University of Tarbiat Modares, Tehran. Iran. | ||
| چکیده | ||
| Rising global food demand necessitates reducing losses through innovative technologies like greenhouse systems. This research compared and examined the performance of mushroom products in moistened and non-moistened treatments. The research was conducted to investigate the effectiveness of environmental control circuits in two main stages of growing button mushroom. In the first stage, the design of the environmental control circuit and moisture of the mushroom growth chamber were addressed. In the second stage, practical use of a moisture control circuit was applied in the mushroom growth chamber and a complete process of growing button mushroom was carried out. The results showed that mushroom in moistened treatment had significant changes in color and weight characteristics of samples, which had a positive impact. Also, using moisture resulted in less browning index and color changes in all samples. Additionally, weight changes in samples were lower when using a moisture control device. Finally, the results obtained showed that the use of 5% moisture treatment reduced weight changes by 4% and also increased the surface area of the mushroom caps by 13%. | ||
| کلیدواژهها | ||
| Mushroom؛ Humidifier؛ Control؛ Humidity | ||
| مراجع | ||
|
Anand, S., & Barua, M. (2022). Modeling the key factors leading to post-harvest loss and waste of fruits and vegetables in the agri-fresh produce supply chain. Computers and electronics in agriculture, 198, 106936. https://doi.org/10.1016/j.compag.2022.106936
Asige, M. L., & Omuse, O. D. (2022). Influence of Post-Harvest Technology on Food Security in Narok East sub-County, Kenya. Interdisciplinary Journal of Rural and Community Studies, 4, 1-15. https://doi.org/10.51986/ijrcs-2022.vol4.01
Babu, A. K., Kumaresan, G., Raj, V. A. A., & Velraj, R. (2018). Review of leaf drying: Mechanism and influencing parameters, drying methods, nutrient preservation, and mathematical models. Renewable and sustainable energy reviews, 90, 536-556. https://doi.org/10.1016/j.rser.2018.04.002
Benko, B., Uher, S. F., Radman, S., & Opačić, N. (2023). Hydroponic Production Systems in Greenhouses. In Climate Smart Greenhouses-Innovations and Impacts. IntechOpen. https://doi.org/10.5772/intechopen.113056
Crippa, M., Solazzo, E., Guizzardi, D., Monforti-Ferrario, F., Tubiello, F. N., & Leip, A. (2021). Food systems are responsible for a third of global anthropogenic GHG emissions. Nature food, 2(3), 198-209. https://doi.org/10.1038/s43016-021-00225-9
Drake, P. L., Froend, R. H., & Franks, P. J. (2013). Smaller, faster stomata: scaling of stomatal size, rate of response, and stomatal conductance. Journal of experimental botany, 64(2), 495-505. https://doi.org/10.1093/jxb/ers347
Ferrante, A., & Mariani, L. (2018). Agronomic management for enhancing plant tolerance to abiotic stresses: High and low values of temperature, light intensity, and relative humidity. Horticulturae, 4(3), 21. https://doi.org/10.3390/horticulturae4030021
Ghani, S., Bakochristou, F., ElBialy, E. M. A. A., Gamaledin, S. M. A., Rashwan, M. M., Abdelhalim, A. M., & Ismail, S. M. (2019). Design challenges of agricultural greenhouses in hot and arid environments A review. Engineering in Agriculture, Environment and Food, 12(1), 48-70. https://doi.org/10.1016/j.eaef.2018.09.004
Ghoulem, M., El Moueddeb, K., Nehdi, E., Boukhanouf, R., & Calautit, J. K. (2019). Greenhouse design and cooling technologies for sustainable food cultivation in hot climates: Review of current practice and future status. Biosystems Engineering, 183, 121-150. https://doi.org/10.1016/j.biosystemseng.2019.04.016
Gruda, N., Bisbis, M., & Tanny, J. (2019). Influence of climate change on protected cultivation: Impacts and sustainable adaptation strategies-A review. Journal of Cleaner Production, 225, 481-495. https://doi.org/10.1016/j.jclepro.2019.03.210
Jafarzadeh, S., Azadbakht, M., Varasteh, F., & Vahedi Torshizi, M. (2022). Effects of various coatings and packing materials on persimmon fruit color indexes during quasi-static loading. Iranian Food Science and Technology Research Journal, 18(3), 1-14. https://doi.org/10.22067/ifstrj.2021.72937.1098
Joshi, A., Saxena, A., & Das, S. K. (2024). Effect of Greenhouse Microclimate on Crop Performance. In Protected Cultivation (pp. 135-159). Apple Academic Press. https://doi.org/10.1201/9781003402596-6
Malhotra, S. (2017). Horticultural crops and climate change: A review. The Indian Journal of Agricultural Sciences, 87(1), 12-22. https://doi.org/10.56093/ijas.v87i1.67138
Moreno, J., Espinoza, C., Simpson, R., Petzold, G., Nuñez, H., & Gianelli, M. (2016). Application of ohmic heating/vacuum impregnation treatments and air drying to develop an apple snack enriched in folic acid. Innovative Food Science & Emerging Technologies, 33, 381-386. https://doi.org/10.1016/j.ifset.2015.12.014
Mortezapour, H., Noroozi, A., & Abdi, A. (2024). Development of an Indirect Forced Flow Greenhouse Solar Dryer for Barberry Drying. Biomechanism and Bioenergy Research, 3(2), 1-8. https://doi.org/10.22103/bbr.2024.22906.1079
O'sullivan, C., Bonnett, G., McIntyre, C., Hochman, Z., & Wasson, A. (2019). Strategies to improve the productivity, product diversity and profitability of urban agriculture. Agricultural Systems, 174, 133-144. https://doi.org/10.1016/j.agsy.2019.05.007
Rademacher, W. (2015). Plant growth regulators: backgrounds and uses in plant production. Journal of plant growth regulation, 34, 845-872. https://doi.org/10.1007/s00344-015-9541-6
Shah, F., & Wu, W. (2019). Soil and crop management strategies to ensure higher crop productivity within sustainable environments. Sustainability, 11(5), 1485. https://doi.org/10.3390/su11051485
Umiralievna, B. G., Aitzhamal, M., Maralovich, K. A., Altynbekovna, S. A., Nurgaiypovna, K. A., Kyrbassova, E., ... & Berdibekqyzy, A. G. (2024). Ecophysiological indicators of growing some woody plants under irrigated conditions. Caspian Journal of Environmental Sciences, 22(3), 763-767.https://doi.org/10.22124/CJES.2024.7768
Vatistas, C., Avgoustaki, D. D., & Bartzanas, T. (2022). A systematic literature review on controlled-environment agriculture: How vertical farms and greenhouses can influence the sustainability and footprint of urban microclimate with local food production. Atmosphere, 13(8), 1258. https://doi.org/10.3390/atmos13081258 | ||
|
آمار تعداد مشاهده مقاله: 144 تعداد دریافت فایل اصل مقاله: 94 |
||