آمار
| تعداد نشریات | 26 |
| تعداد شماره‌ها | 447 |
| تعداد مقالات | 4,557 |
| تعداد مشاهده مقاله | 5,380,005 |
| تعداد دریافت فایل اصل مقاله | 3,580,083 |
Design and Construction of Chassis Dynamometer for On-Site Testing of Tractors | ||
| Biomechanism and Bioenergy Research | ||
| دوره 3، شماره 2 - شماره پیاپی 6، اسفند 2024، صفحه 51-60 اصل مقاله (666.55 K) | ||
| نوع مقاله: Original Research | ||
| شناسه دیجیتال (DOI): 10.22103/bbr.2024.23684.1086 | ||
| نویسندگان | ||
| Hasan Shahbazi؛ Aref Mardani* ؛ Arash Mohebbi؛ Sajjad Derafshpour | ||
| Department of Mechanical Engineering of Biosystems, Urmia University, Urmia, Iran. | ||
| چکیده | ||
| Measuring tractor performance parameters is crucial for validating manufacturer claims and selecting a suitable tractor. Field studies often face high costs and inaccuracies due to external factors and limited parameter measurement. A chassis dynamometer serves as an effective simulator for tractor movement on the ground. This research focused on designing and constructing an in-situ test system (chassis dynamometer) with practical features for measuring parameters at various speeds, loads, and conditions. An accurate data acquisition system records unlimited data based on relations between drawbar traction, speed, vertical load on driving wheels, and the distance to the center of gravity. To evaluate the system, the traction performance of an MF285 tractor was tested at different load and speed levels. The drawbar pull and dynamic axle load of the 2WD tractor were measured, with a maximum traction of about 11 kN. This study successfully designed and implemented an in-situ test system to assess the traction and balance capacities of conventional tractors by applying maximum load on the driving wheels. | ||
| کلیدواژه‌ها | ||
| Tractor؛ Dynamometer؛ Chassis dynamometer | ||
| مراجع | ||
|
Al-Jalil, H., Khdair, A., & Mukahal, W. (2001). Design and performance of an adjustable three-point hitch dynamometer. Soil and Tillage Research, 62(3-4), 153-156. https://doi.org/10.1016/S0167-1987(01)00219-7
Barger, E. L., Carleton, W., McKibben, E., & Bainer, R. (1952). Tractors and their power units (Vol. 73). LWW.
Burt, E. C., Bailey, A. C., Patterson, R. M., & Taylor, J. H. (1979). Combined effects of dynamic load and travel reduction on tire performance. Transactions of the ASAE, 22(1), 0040-0045. https://doi.org/10.13031/2013.34962
Dwyer, M. J. (1984). The tractive performance of wheeled vehicles. Terramechanics, 21(1), 19-34. https://doi.org/10.1016/0022-4898(84)90005-3
Osetinsky, A., & Shmulevich, I. (2004). Traction performance simulation of a pushed/pulled driven wheel. Transactions of the ASAE, 47(4), 981-994. https://doi.org/10.13031/2013.16568
Servadio, P. (2010). Applications of empirical methods in central Italy for predicting field wheeled and tracked vehicle performance. Soil and Tillage Research, 110(2), 236-242. https://doi.org/10.1016/j.still.2010.08.009
Shafaei, S., & Mousazadeh, H. (2024). Review and analysis of state of the art, challenges, and opportunities concerned with development of drawbar dynamometer for tractor platforms. Computers and Electronics in Agriculture, 223, 109100. https://doi.org/10.1016/j.compag.2024.109100
Vahedi, E., Rabbani, H., & Faramarzi, P. (2022). Redesigning a Stalk Chopper Mechanism for Reducing Cutting Energy and Optimizing Its Bite Length. Biomechanism and Bioenergy Research, 1(2), 69-73. https://doi.org/10.22103/bbr.2022.20466.1030
Zoz, F., & Brixius, W. (1979). Traction prediction for agricultural tires on concrete. ASAE paper, 79, 1046.
Zoz, F. M. (1972). Predicting tractor field performance. Transactions of the ASAE, 15(2), 249-0255. https://doi.org/10.13031/2013.37878
Zoz, F. M., Turner, R., & Shell, L. (2002). Power delivery efficiency: a valid measure of belt and tire tractor performance. Transactions of the ASAE, 45(3), 509. https://doi.org/10.13031/2013.8817 | ||
|
آمار تعداد مشاهده مقاله: 79 تعداد دریافت فایل اصل مقاله: 98 |
||