آمار
| تعداد نشریات | 26 |
| تعداد شمارهها | 447 |
| تعداد مقالات | 4,557 |
| تعداد مشاهده مقاله | 5,380,005 |
| تعداد دریافت فایل اصل مقاله | 3,580,083 |
Modeling of Six Openers for Seeding Machines, Cross-Shaped, T-Inverse, U-Shaped, V-Shaped, V-Shaped with Two Plates and Tulip-Shaped | ||
| Biomechanism and Bioenergy Research | ||
| دوره 3، شماره 2 - شماره پیاپی 6، اسفند 2024، صفحه 98-109 اصل مقاله (411.79 K) | ||
| نوع مقاله: Original Research | ||
| شناسه دیجیتال (DOI): 10.22103/bbr.2024.24204.1093 | ||
| نویسندگان | ||
| Behnam Sepehr؛ isa Hazbawi* | ||
| Department of Biosystem Engineering, Faculty of Agriculture, Lorestan University, Lorestan, Iran. | ||
| چکیده | ||
| The use of cultivation techniques that can properly prepare the seed bed and plant the seeds at an almost uniform depth has become necessary more than ever. In this research, the plane sitting test was used for modeling. In the simulation, the soil was considered as an elastic plastic body with two criteria Mohr-Coulomb and Drucker-Prager and the influence of the tiller as a compressive force. This experiment was implemented using strip plots in the form of a completely randomized block design with four replications in the crop year 1401-1400. The design of the tools was done using SolidWorks software and the modeling was done using Abaqus software. The general purpose of this research was to introduce the best tiller with suitable planting arrangements for direct cultivation machinery in Iran. The results of modeling with Abaqus software showed that the Drucker-Prager behavior model with a correlation coefficient of 0.93% was in better agreement than the Mohr-Coulomb model and the amount of stress and displacement in the layers close to the loading level is greater and moving towards the lower layers. This value decreases. The overall results showed that the cruciferous cultivar has the most optimal type of cultivation arrangement. | ||
| کلیدواژهها | ||
| Abaqus؛ Cross؛ Force؛ Modeling؛ Openers | ||
| مراجع | ||
|
Ahmad, F., Adeel, M., Qui, B., Ma, J., Shoaib, M., Shakoor, A., & Chandio, F. A. (2021). Sowing uniformity of bed-type pneumatic maize planter at various seedbed preparation levels and machine travel speeds. International Journal of Agricultural and Biological Engineering, 14(1), 165-171. https://doi.org/10.25165/j.ijabe.20211401.5054
Alexandrou, A., & Earl, R. (1995). In situ determination of the pre-compaction stress of a soil. Journal of Agricultural Engineering Research, 61(1), 67-71. https://doi.org/10.1006/jaer.1995.1032
Asoodar, M., Bakhshandeh, A., Afraseabi, H., & Shafeinia, A. (2006). Effects of press wheel weight and soil moisture at sowing on grain yield. Journal of Agronomy, 5(2), 278-283.
Barzegar, A., Asoodar, M., Eftekhar, A., & Herbert, S. (2004). Tillage effects on soil physical properties and performance of irrigated wheat and clover in semi arid region. Journal of Agronomy, 3(4), 237-242.
Chaudhuri, D. (2001). PM—power and machinery: performance evaluation of various types of furrow openers on seed drills—a review. Journal of agricultural engineering research, 79(2), 125-137. https://doi.org/10.1006/jaer.2000.0688
Chen, Y., Monero, F., Lobb, D., Tessier, S., & Cavers, C. (2004). Effects of six tillage methods on residue incorporation and crop performance in a heavy clay soil. Transactions of the ASAE, 47(4), 1003-1010. https://doi.org/10.13031/2013.16570
Conte, O., Levien, R., Debiasi, H., Stürmer, S. L. K., Mazurana, M., & Müller, J. (2011). Soil disturbance index as an indicator of seed drill efficiency in no-tillage agrosystems. Soil and Tillage Research, 114(1), 37-42. https://doi.org/10.1016/j.still.2011.03.007
Failla, S., Pirchio, M., Sportelli, M., Frasconi, C., Fontanelli, M., Raffaelli, M., & Peruzzi, A. (2021). Evolution of smart strategies and machines used for conservative management of herbaceous and horticultural crops in the mediterranean basin: A review. Agronomy, 11(1), 106. https://doi.org/10.3390/agronomy11010106
Gregory, A., Whalley, W., Watts, C., Bird, N., Hallett, P., & Whitmore, A. (2006). Calculation of the compression index and precompression stress from soil compression test data. Soil and Tillage Research, 89(1), 45-57. https://doi.org/10.1016/j.still.2005.06.012
Hambleton, J., & Drescher, A. (2009). On modeling a rolling wheel in the presence of plastic deformation as a three-or two-dimensional process. International Journal of Mechanical Sciences, 51(11-12), 846-855. https://doi.org/10.1016/j.ijmecsci.2009.09.024
Karthikeyam, K., Sundar, S. S., Subramaniam, C. S., & Sivakumar, P. (2017). Design and development of a multi-utility agricultural vehicle. 2017 IEEE Technological innovations in ICT for agriculture and rural development (TIAR), pp.109-111.
Khodaei, M., Fattahi, S. F., & Navid, H. (2016). Evaluation of FEM modelling for stress propagation under pressure wheel of corn planter. Agricultural Engineering International: CIGR Journal, 18(3), 14-22.
Li, H., Gao, H., Wu, H., Li, W., Wang, X., & He, J. (2007). Effects of 15 years of conservation tillage on soil structure and productivity of wheat cultivation in northern China. Soil Research, 45(5), 344-350.
Mardani, A., Dibagar, N., & Modares Motlagh, A. (2016). Analysis of finite element simulation of driven tire_soil interaction to estimate soil vertical stress. Agricultural Engineering (Agricultural Scientific Journal), 39(1), 113-125. (In Persian) https://doi.org/10.22055/agen.2016.12278
Mizuno, E., & Chen, W.-F. (1983). Cap models for clay strata to footing loads. Computers & Structures, 17(4), 511-528. https://doi.org/10.1016/0045-7949(83)90046-9
Naderi-Boldaji, M., Hajian, A., Ghanbarian, D., & Bahrami, M. (2018). Finite element simulation of plate sinkage, confined and semi-confined compression tests: A comparison of the response to yield stress. Soil and Tillage Research, 179, 63-70. https://doi.org/10.1016/j.still.2018.02.003
Sivarajan, S., Maharlooei, M., Bajwa, S., & Nowatzki, J. (2018). Impact of soil compaction due to wheel traffic on corn and soybean growth, development and yield. Soil and Tillage Research, 175, 234-243. https://doi.org/10.1016/j.still.2017.09.001
Vamerali, T., Bertocco, M., & Sartori, L. (2006). Effects of a new wide-sweep opener for no-till planter on seed zone properties and root establishment in maize (Zea mays, L.): A comparison with double-disk opener. Soil and Tillage Research, 89(2), 196-209. https://doi.org/10.1016/j.still.2005.07.011 | ||
|
آمار تعداد مشاهده مقاله: 115 تعداد دریافت فایل اصل مقاله: 51 |
||