آمار
| تعداد نشریات | 26 |
| تعداد شماره‌ها | 447 |
| تعداد مقالات | 4,557 |
| تعداد مشاهده مقاله | 5,380,005 |
| تعداد دریافت فایل اصل مقاله | 3,580,083 |
Design, Manufacture and Evaluation of Oat De-Husking Machine | ||
| Biomechanism and Bioenergy Research | ||
| دوره 3، شماره 2 - شماره پیاپی 6، اسفند 2024، صفحه 164-174 اصل مقاله (825.38 K) | ||
| نوع مقاله: Original Research | ||
| شناسه دیجیتال (DOI): 10.22103/bbr.2024.24358.1101 | ||
| نویسندگان | ||
| Kaumars Merikhi1؛ Hekmat Rabbani* 2؛ sohbat Bahraminejad3 | ||
| 1Mechanical Engineering of Biosystems Department, Tehran University, Tehran, Iran. | ||
| 2Mechanical Engineering of Biosystems Department, Razi University, Kermanshah, Iran. | ||
| 3Plant Genetics and Production Department, Razi University, Kermanshah, Iran. | ||
| چکیده | ||
| Peeling is an essential step in oat processing. In the operation of peeling oats with peeling machines, a percentage of oats will break and cause quality waste in the product. In this study for the first time, the skin-separating mechanism was created by the contact of two surfaces of the conveyor belt, where the belt passes by the seeds at a higher speed. The upper and lower belts are flat types with 2 mm space, based on the average value of the width of six varieties of oats. The lower belt has a lower speed than the upper belt, the seeds fall on it and move forward. While the upper belt has a higher speed, it causes the rotational movement of the seed by moving on the seeds, and while the seed is between the two belts, it is under pressure, and due to this pressure and rotational movement, the seed skin is broken and separated. To prevent the lower belt from bending, a tray is installed under the lower belt. The amount of dehulled grain is calculated based on the speed of the lower belt. According to the calculations, having a reliability factor of 2, an electric motor of 4 horsepower at 1500 rpm has been selected. The upper speed of the belt is 31.4 m/min and the outlet opening of the tank is 0.003 m2. The amount of peeled oats is 486 kg per hour. In the evaluation of the peeling machine, 76% of Euro varieties was obtained. | ||
| کلیدواژه‌ها | ||
| Oat؛ Husking؛ Design؛ Manufacturing؛ Separation | ||
| مراجع | ||
|
Amiss, J. M., Jones, F. D., Ryffel, H. H., McCauley, C. J., & Heald, R. (2004). Guide to the Use of Tables and Formulas in Machinery's Handbook (27th Edition ed.). Industrial Press Inc.
Asli-Ardeh, E. A., Taghizadeh, G., & Taginezhad, E. (2022). Investigating the Effect of Some Operating Factors on the Performance of a Laboratory Cluster Threshing Machine–Case Study: Two Barley Varieties. Biomechanism and Bioenergy Research, 1(2), 86-92. https://doi.org/10.22103/bbr.2022.20487.1035
Avallone, E., Baumeister, T., & Sadegh, A. (2006). Marks' Standard Handbook for Mechanical Engineers. 10. Citeseer.
Babeski, C. M., da Silva, J. A. G., Carvalho, I. R., Kraisig, A. R., da Rosa, J. A., Peter, C. L., . . . Schünemann, L. L. (2023). Agronomic Biofortification with Iron and Zinc on Yield and Quality of Oat Grains for the Validation of a Potential Resource for Nutritional Security. Revista de Gestão Social e Ambiental, 17(8), e03924-e03924. https://doi.org/10.24857/rgsa.v17n8-020
Budynas, R. G., & Nisbett, J. K. (2011). Shigley's mechanical engineering design (Vol. 9). McGraw-Hill New York.
Doehlert, D. C. (2002). Quality improvement in oat. Journal of crop production, 5(1-2), 165-189. https://doi.org/10.1300/J144v05n01_07
Khodabakhshian, R., Bayati, M., Shakeri, M., & Khojastepour, M. (2010). Design and manufacture of a pistachio peeling machine. World Applied Sciences Journal, 11(8), 930-937.
Mirmoghtadaie, L., & Kadivar, M. (2013). Chemical modification of oat flour starch and protein and assessment of the physical characterisrics of a cake prepared using them. Iranian Journal of Nutrition Sciences and Food Technology, 8(2), 103-113. (In Persian)
Rostami, M. A. (2008). Design, construction, and evaluation of a peanut peeler. Agricultural engineering research, 9(1), 1-14. (In Persian)
Yang, Z., Xie, C., Bao, Y., Liu, F., Wang, H., & Wang, Y. (2023). Oat: Current state and challenges in plant-based food applications. Trends in Food Science & Technology, 134, 56-71. https://doi.org/10.1016/j.tifs.2023.02.017 | ||
|
آمار تعداد مشاهده مقاله: 99 تعداد دریافت فایل اصل مقاله: 61 |
||