آمار
| تعداد نشریات | 26 |
| تعداد شمارهها | 447 |
| تعداد مقالات | 4,557 |
| تعداد مشاهده مقاله | 5,380,003 |
| تعداد دریافت فایل اصل مقاله | 3,580,074 |
Enhancing Diesel Combustion Efficiency with Multi-Stage Fuel Injection: Applications in Maritime and Heavy-Duty Agricultural Engines | ||
| Biomechanism and Bioenergy Research | ||
| دوره 4، شماره 1 - شماره پیاپی 7، خرداد 2025، صفحه 19-31 اصل مقاله (1.03 M) | ||
| نوع مقاله: Original Research | ||
| شناسه دیجیتال (DOI): 10.22103/bbr.2025.24453.1106 | ||
| نویسندگان | ||
| Abbas Zarenezhad Ashkezazi* ؛ Rasool Karimi؛ Hossein Abdollahy | ||
| Department of Mechanical Engineering, Imam Khomeini Marine Sciences University, Nowshahr, Iran. | ||
| چکیده | ||
| Diesel engines are extensively used worldwide, particularly in Iran, for power generation, ship propulsion, and agricultural machinery such as tractors. This study examines the performance of a heavy-duty diesel engine by evaluating four different fuel injection rate models using computational fluid dynamics. Results indicate that the triangular injection rate yields optimal performance, improving brake-specific fuel consumption by 5.5% and increasing peak combustion chamber temperature compared to other models. Reducing the nozzle diameter from 330 to 190 microns enhances combustion efficiency and lowers carbon monoxide (CO) emissions by 15%. Shortening the injection duration to 2 milliseconds improves specific fuel consumption by 3.3%, reflecting better combustion performance. Additionally, a spray angle of 147.5 degrees optimizes fuel-air mixing, leading to more complete combustion and minimal CO emissions. Finally, a 7.5% exhaust gas recirculation rate is identified as the optimal balance for reducing both soot and nitrogen oxides (NOx) emissions. | ||
| کلیدواژهها | ||
| Diesel Engines؛ Computational Fluid Dynamics؛ Injection Analysis؛ Emissions؛ Performance | ||
| مراجع | ||
|
Agarwal, D., Singh, S. K., & Agarwal, A. K. (2011). Effect of Exhaust Gas Recirculation (EGR) on performance, emissions, deposits and durability of a constant speed compression ignition engine. Applied energy, 88(8), 2900-2907. https://doi.org/10.1016/j.apenergy.2011.01.066
Ahmadipour, S., Aghkhani, M. H., & Zareei, J. (2019). The effect of compression ratio and alternative fuels on performance and exhaust emission in a diesel engine by modelling engine. AUT Journal of Mechanical Engineering, 3(2), 217-228. https://doi.org/10.22060/ajme.2019.15162.5764
Carvalho, F., Portugal-Pereira, J., Junginger, M., & Szklo, A. (2021). Biofuels for maritime transportation: A spatial, techno-economic, and logistic analysis in brazil, europe, south africa, and the usa. Energies, 14(16), 4980. https://doi.org/10.3390/en14164980
Chen, R., Li, H., Wang, J., & Guo, X. (2020). Effects of pressure and nozzle size on the spray characteristics of low-pressure rotating sprinklers. Water, 12(10), 2904. https://doi.org/10.3390/w12102904
Cowart, J., Luning Prak, D., & Hamilton, L. (2015). The effects of fuel injection pressure and fuel type on the combustion characteristics of a diesel engine. Journal of Engineering for Gas Turbines and Power, 137(10), 101501. https://doi.org/10.1115/1.4029949
Ji, J., Zhang, H., Peng, D., Fu, M., He, C., Yi, F., Yin, H., & Ding, Y. (2022). Estimation of typical agricultural machinery emissions in China: Real-world emission factors and inventories. Chemosphere, 307, 136052. https://doi.org/10.1016/j.chemosphere.2022.136052
Kaplan, M. (2019). Influence of swirl, tumble and squish flows on combustion characteristics and emissions in internal combustion engine-review. International Journal of Automotive Engineering and Technologies, 8(2), 83-102. https://doi.org/10.18245/ijaet.558258
Kharkeshi, B. A., Shafaghat, R., Mohebbi, M., Amiri, S. T., & Mehrabiyan, M. (2021). Numerical simulation of a heavy-duty diesel engine to evaluate the effect of fuel injection duration on engine performance and emission. International Journal of Engineering, Transactions B: Applications, 34(11), 2442-2451. https://doi.org/10.5829/ije.2021.34.11b.08
Kim, H. J., Park, S. H., & Lee, C. S. (2016). Impact of fuel spray angles and injection timing on the combustion and emission characteristics of a high-speed diesel engine. Energy, 107, 572-579. https://doi.org/10.1016/j.energy.2016.04.035
Krogerus, T. R., Hyvönen, M. P., & Huhtala, K. J. (2016). A survey of analysis, modeling, and diagnostics of diesel fuel injection systems. Journal of Engineering for Gas Turbines and Power, 138(8), 081501. https://doi.org/10.1115/1.4032417
Lovarelli, D., & Bacenetti, J. (2019). Exhaust gases emissions from agricultural tractors: State of the art and future perspectives for machinery operators. Biosystems engineering, 186, 204-213. https://doi.org/10.1016/j.biosystemseng.2019.07.011
Mobasheri, R., Peng, Z., & Mirsalim, S. M. (2011). CFD evaluation of effects of split injection on combustion and emissions in a DI diesel engine (No. 2011-01-0822). SAE Technical Paper.https://doi.org/10.4271/2011-01-0822
Niknam, Y., Mohammad Zamani, D., & Gholami Par-Shokohi, M. (2023). Experimental investigation of performance and emissions of a compression ignition engine using a combination of compressed natural gas and diesel fuel. Journal of Agricultural Machinery, 13(1), 67-83. https://doi.org/10.22067/jam.2023.79199.1127
Paykani, A., Chehrmonavari, H., Tsolakis, A., Alger, T., Northrop, W. F., & Reitz, R. D. (2022). Synthesis gas as a fuel for internal combustion engines in transportation. Progress in Energy and Combustion Science, 90, 100995. https://doi.org/10.1016/j.pecs.2022.100995
Qi, D., Leick, M., Liu, Y., & Chia-fon, F. L. (2011). Effect of EGR and injection timing on combustion and emission characteristics of split injection strategy DI-diesel engine fueled with biodiesel. Fuel, 90(5), 1884-1891. https://doi.org/10.1016/j.fuel.2011.01.016
Yan, B., Tong, L., Wang, H., Zheng, Z., Qin, Y., & Yao, M. (2017). Experimental and numerical investigation of the effects of combustion chamber reentrant level on combustion characteristics and thermal efficiency of stoichiometric operation natural gas engine with EGR. Applied Thermal Engineering, 123, 1473-1483. https://doi.org/10.1016/j.applthermaleng.2017.05.139
Zhou, Q., Lucchini, T., D’Errico, G., Novella, R., García-Oliver, J. M., & Lu, X. (2021). CFD analysis of combustion and emission characteristics of primary reference fuels: from transient Diesel spray to heavy-duty engine. Fuel, 301, 120994. https://doi.org/10.1016/j.fuel.2021.120994 | ||
|
آمار تعداد مشاهده مقاله: 108 تعداد دریافت فایل اصل مقاله: 107 |
||